Piquadro Credit Card Holder With Sliding System Tobacco Leather PP4825B3R/CU

Technical specifications

The Piquadro Credit Card Holder with Sliding System is made with full-grain Tuscan leather, which has been tanned with vegetable tannins. The non-homogeneous appearance of the leather is the result of an artisanal process called washing, which keeps the warmth and charm of natural leather intact.

After tanning, the leather is immersed in large tanks of water without the use of chemicals. Subsequently, it is dried in drums and then stretched out to release its fibers. It is thanks to the experience of the master tanners that the leather acquires the unique characteristics of color shades, grain and softness that make each piece of the Black Square collection unique and exclusive.

Product features

• Credit card holder with sliding system and RFID anti-fraud protection

Product testing

• pH determination test on the skin: allows you to determine the real pH value of the skin which must be between 3.5 and 4.5.
• Oxidation test: establishes the propensity of metal surfaces to oxidize in contact with skin or water. No oxidation is permitted.
• Color fastness test to water and sweat: serves to determine the color fastness of the product in contact with water and sweat. The possible transfer of color on the fabrics used in clothing is checked.
• VESLIC test on leather: useful for determining the resistance of each type of leather to wear, abrasion or color transfer. The leather sample is tested both dry and in a humid environment and under a removable weight of 1 kg.
• Leather resistance test to stains: the leather's reaction to stains is determined by pouring small drops of water on its surface and checking every 30 minutes and after 24 hours. No stains, marks or waves on the leather are permitted.
• Metal Finish Strength Test: Evaluates the strength of the finish on the metal accessory by simulating normal deterioration. A cut is made with a cutter to check the behavior of the finish.
• Salt spray resistance test: establishes the propensity of metal surfaces to oxidize or damage the finish due to salt spray (fog at 47°C - test duration: 24 hours). No oxidation is permitted.
• Leather finishing resistance test: checks the resistance of the leather finishing. A layer of adhesive tape is applied to the surface and after being torn, the integrity of the leather is checked.

Technical specifications

• Weight: 0.070g
• Measurements: 6.20 x 10.50 x 1.20 (cm)
• Number of compartments: 1
• Construction type: rigid
• Further information on construction: vertical
• Item thickness: with side
• Processing: raw cut
• Material: metal and leather
• Credit card holder: 1
• Future Availability Date: 2019-12-01
• Animal leather: Bovine

Material details